|
According to the US Dept of Energy web site, we can all save energy if we change the lighting we use in and around our homes. This is from their website:
The quantity and quality of light around us determine how well we see, work, and play. Light affects our health, safety, morale, comfort, and productivity. In your home, you can save energy while still maintaining good light quantity and quality.
* Consider using high-intensity discharge (also called HID) or low-pressure sodium lights.
* Exterior lighting is one of the best places to use CFLs because of their long life. If you live in a cold climate, be sure to buy a lamp with a cold weather ballast since standard CFLs may not work well below 40°F.
* Turn off decorative outdoor natural gas lamps; just eight such lamps burning year-round use as much natural gas as it takes to heat an average-size home during an entire winter.
* Use outdoor lights with a photocell unit or a motion sensor so they will turn on only at night or when someone is present. A combined photocell and motion sensor will increase your energy savings even more.
* Consider using 4-watt minifluorescent or electro-luminescent night lights. Both lights are much more efficient than their incandescent counterparts. The luminescent lights are cool to the touch.
* If you have torchiere fixtures with halogen lamps, consider replacing them with compact fluorescent torchieres. Compact fluorescent torchieres use 60% to 80% less energy, can produce more light (lumens), and do not get as hot as the halogen torchieres. Halogen torchieres are a fire risk because of the high temperature of the halogen bulb.
* Take advantage of daylight by using light-colored, loose-weave curtains on your windows to allow daylight to penetrate the room while preserving privacy. Also, decorate with lighter colors that reflect daylight.
* Recessed downlights (also called recessed cans) are now available that are rated for contact with insulation (IC rated), are designed specifically for pin-based CFLs, and can be used in retrofits or new construction.
* Use CFLs in all the portable table and floor lamps in your home. Consider carefully the size and fit of these systems when you select them. Some home fixtures may not accommodate some of the larger CFLs.
* Consider using 4-watt minifluorescent or electro-luminescent night lights. Both lights are much more efficient than their incandescent counterparts. The luminescent lights are cool to the touch.
11:45 AM - Aug. 26, 2007 - {2} -
re: Change your lights - save the energy
We recently replaced all of our "high trafficked" lights with energy efficient bulbs. They take a little getting used to as they come on dim but light up over the course of a minute or so. Costco has a very good deal on a 4 pack. We are still waiting for our first electricity bill so not quite sure what the total savings will be.
Because we live in Arizona and have lots of sunshine we are able to use solar decorative lights. They are very comparable to the electric counterparts.
re: Change your lights - save the energy
We replaced some of our interior bulbs a couple of years ago. The only problem we have is that they don't work with dimmer switches or on a three way switch. Apparently you have to buy special switches for that to work properly. But we do enjoy them where we have them as they give off a softer and cooler light.
Andi Durbin - 7:35 AM - Aug. 28, 2007
|
RSS Blog Feed